電纜槽模具不易毀壞,電纜槽模具應用鋼材要求越來越少的殘渣,細勻稱,打磨拋光時沒有纖維趨向,不應該出現縫隙腐蝕或橙皮缺陷。第二個是鉆削生產加工要求。模具生產的全過程中,必須有一個切割和鉗工和更換的問題。使用期拉長,提升加工性和減少粗糙度和塑料模具鋼材的強度務必適合。最終是表面強度和耐磨性能的要求。
The mould of cable tray is not easy to be damaged. The steel used in the mould of cable tray requires less and less residue, which is fine and symmetrical. There is no fiber tendency when polishing, and there should be no crevice corrosion or orange peel defect. The second is drilling production and processing requirements. In the whole process of mold production, there must be a problem of cutting and fitter and replacement. Long service life, improve processability and reduce roughness and plastic mold steel strength must be suitable. The final requirement is the surface strength and wear resistance.