制作不同的模具主需要更換相應的鋼模具就可以注塑機成為了整個生產過程中對主要的電纜槽鋼模具的制作原來是根據塑料pp高溫熔化低溫冷卻的原理來的我國生產的模具大部分都是電纜槽鋼模具。水泥漿不足也會導致氣泡產生。漿時不要一次性灌滿需要注意的是水泥漿不易過稀。然后再太陽充足的地方晾干，就可以脫模了，生產出來水泥制品。對于模具的保養一定不要放在高溫的環境下。
To make different molds, the main need to replace the corresponding steel mold, the injection molding machine has become the main cable channel mold in the whole production process. The production of the main cable channel steel mold was originally based on the principle of high temperature melting and low temperature cooling of plastic pp. most of the molds produced in China are cable channel steel molds. It can also lead to insufficient bubbles in cement slurry. Do not fill the slurry at one time. It should be noted that the cement slurry is not easy to be too thin. Then the sun is enough to dry, you can demould, produce cement products. For mold maintenance must not be placed in a high temperature environment.
電纜槽鋼模具使用簡單在每一次使用完模具后一定要涂油保養。然后經過震動平臺只需要把攪拌好的水泥放入到模具里面。因此在模具生產過程中也限定了電纜槽鋼模具的大規模生產采用高性能材料。
The cable channel steel mold is easy to use, and it must be oiled after each use. Then through the vibration platform, only need to put the mixed cement into the mold. Therefore, in the process of mold production, it is also limited to use high-performance materials in large-scale production of cable channel steel mold.